High Performance Spindles


  • State-of-the-art manufacturing facility
  • Multi-stage inspection of spindles, guaranteeing all quality parameters


  • Spindle Top Parts ensure excellent fitment of bobbin tube over its entire length for stable running of spindles
  • Specially drawn aluminium rods ensure strength and suitability of the Top Parts


  • Capable of running spindle speed up to 25,000rpm (mechanically)
  • The above inserts comprise of neck bearing and a hydrodynamic radial bearing with movable flat disc, to absorb axial forces and ensure low noise level
  • The reduced shaft diameter of 6.8 mm reduces the bearing forces and permits wharve diameter up to 18.5 mm
  • Sandwich design top part ensures higher rigidity and lower spindle vibration levels
  • Low energy consumption, due to reduced wharve diameter and the use of suitable lubrication oil
  • Operatorriendly single pieceinger brake


  • Optimum relation between ring diameter and tube diameter
    Mean bare bobbin diameter / Ring inner diameter = 0.45 to 0.5
  • Optimum relation between ring diameter and tube length
    Ring inner diameter / Tube Length = 0.2 to 0.25


Spindle Type Wharve Dia Insert Top Part Max. Speed Lift
M18.5 HS 18.5 mm CS-1 Sandwich 25,000 rpm 160,170,180& 190

Taper – 1:40 DUI in mm – 18, 20 & 22


Lakshmi Machine Works Limited, a leading Textile...

Lakshmi Machine Works Ltd (LMW) was started...

LMW Foundry Division is a...

Lakshmi Machine Works Limited, founded in...